Materials:
hand towel (the larger the better -- I found the white one pictured in these instructions at Ikea for a whopping 50 cents -- places like Ross and TJ Maxx are great too)
knit scraps (rib knit works best) - cut a 12"x3" piece
Instructions:
1. Using a bowl or other object approximately 5-6" in diameter, trace a circle in the middle of the towel, 6" from one end. I know, white is not a smart choice for a bib, but I had the towel on hand (obviously shoved in my sewing stash), so I thought I'd use it as a tester :).
2. Place knit right sides together, matching short ends, and stitch in place using a 1/4" seam allowance.
3. Turn knit right side out and fold in half , matching raw edges.
4. Baste raw edges together. This will be the collar.
5. Mark middle of collar by folding in half at seam. Use these marks to evenly pin collar to circle, with the folded edge towards the outer edges of the bib.
6. Stitch collar to towel, keeping your stitch line just outside of your traced circle.
7. Carefully cut away inner circle of towel. Note: If you have a serger, you can leave a little excess towel seam allowance. If you do not have a serger, cut the towel seam allowance to match the collar seam allowance.
8. Finish inside collar seam allowance by serging raw edges or using a zig zag stitch.
9. To form sleeves, turn bib front toward bib back, folding at the mid-point of the collar. Stitch lines approximately 1" long along side edge on each side of bib back to secure sleeve openings.
10. To form optional pocket, fold bottom edge of front side of bib upward approximately 3-4". Stitch in place along edges of bib. Note: As pictured, you may need to stitch 3/4" or so in from edge if the fabric along the edge is too thick to stitch through.
Make a few -- your kids will love not having a scratchy plastic bib on their necks.
I'll be linking to some of these fabulous linky parties!
No comments:
Post a Comment